3 MM Birch Ply

3mm Birch Plywood is a lightweight and versatile plywood solution made from quality birch wood, ideal for applications requiring a smooth finish, precision, and easy handling. Its thin profile makes it suitable for creative projects, interior applications, decorative work, and lightweight furniture components.

  • Lightweight and easy to handle
  • Smooth surface for painting, laminating, and finishing
  • Ideal for crafts, modelling, and decorative applications

Technical Specifications

Product Indiana Premium Birch Plywood
Timber Species Birch
Construction Multi-layer birch veneer
Density 640–700 kg/m³
Texture Smooth
Surface Sanded
Glue Category Exterior, WBP
Formaldehyde Emission / Compliance FSC, TSCA Title VI, CARB ULEF
Formaldehyde Limitation Meets German requirements for formaldehyde limitation
Appearance Grades AA, BB, CC

Test Results

TEST RESULTS
S.NO CL.NO TESTS VALUE AS PER IS 303:2024
SPECIFICATION
RESULT/
OBSERVATION
1 5.1 Classification by
appearance
BB Satisfactory
2 5.2 (as per Table 1) Surface Defects
(For Surface Type BB)
I. Blister Nil Nil
II. Checks Individual check not more than 100 mm in length and the total length not more 1 000 mm per m2 area Within Limit
III. Discoloration 5 percent Nil
IV. Dote 15 cm per m2 Nil
V. Insect Hole Scattered up to 24 holes per m2 Nil
VI. Joints No restriction Nil
VII. Knots (Dead) 4 up to 20 mm diameter per m2 Nil
VIII. Pin Knots (Dead) 6 per m2 Nil
IX. Pin Knots (Live) No restriction Nil
X. Knots (Tight) No restriction Nil
XI. Patches Any number, provided they are all tight patches and do not mar the appearance Nil
XII. Splits 3 splits, each not more than 4 mm wide and length not more 150 mm, provided they are filled with suitable veneer inserts. Splits up to 25 mm long and 0.8 mm wide may be ignored, provided they are suitably filled with a filler Nil
XIII. Swirl No restriction Not Observed
3 5.2
(As per Table 2)
Permissible Categories of Defects FOR TYPE B – 5, Maximum number of categories of permissible defects, per m2 Within Limit
4 7.0 Manufacture Shall be Satisfactory Satisfactory
5 8 Dimensions and Tolerance
8.1 Width (mm) 1220 (+3/-1) 1220
Length (mm) 2440(+6/-3) 2440
8.2 Thickness (mm) 3 mm ( ±5%) 3.1 (0%)
8.3 Squareness (%) 2 mm per 1000 mm 0.1
Edge Straightness (%) 2 mm per 1000 mm 0.1
6 9.1 Workmanship and
Finish
The plywood board shall be uniform thickness within the tolerance limit. Satisfactory
9.2 The face of plywood board shall be reasonably smooth.
7 11.3 Glue Adhesion
11.3.1 a) Water Resistance Test Pass Standard
8 11.4 Moisture Content (%) (5 – 15) % 9 %
9 11.5 Static Bending Test
MOE (In Direction Parallel to The Grain Direction) N/mm2 Min.
Average 1000 N/mm2 9516
Minimum, Individual 900 N/mm2 9112
MOR (In Direction Parallel to The Grain Direction) N/mm2 Min.
Average 10 N/mm2 90
Minimum, Individual 9N/mm2 87.5
Static Bending Test
MOE (In Direction Perpendicular to The Grain Direction) N/mm2 Min.
Average 1000 N/mm2 6900
Minimum, Individual 900 N/mm2 6680
MOR (In Direction Perpendicular to The Grain Direction) N/mm2 Min.
Average 10 N/mm2 73
Minimum, Individual 9 N/mm2 69.8

3 MM Ply Applications