3 MM Birch Ply
3mm Birch Plywood is a lightweight and versatile plywood solution made from quality birch wood, ideal for applications requiring a smooth finish, precision, and easy handling. Its thin profile makes it suitable for creative projects, interior applications, decorative work, and lightweight furniture components.
- Lightweight and easy to handle
- Smooth surface for painting, laminating, and finishing
- Ideal for crafts, modelling, and decorative applications
Technical Specifications
| Product | Indiana Premium Birch Plywood |
|---|---|
| Timber Species | Birch |
| Construction | Multi-layer birch veneer |
| Density | 640–700 kg/m³ |
| Texture | Smooth |
| Surface | Sanded |
| Glue Category | Exterior, WBP |
| Formaldehyde Emission / Compliance | FSC, TSCA Title VI, CARB ULEF |
| Formaldehyde Limitation | Meets German requirements for formaldehyde limitation |
| Appearance Grades | AA, BB, CC |
Test Results
| TEST RESULTS | ||||
|---|---|---|---|---|
| S.NO | CL.NO | TESTS | VALUE AS PER IS 303:2024 SPECIFICATION |
RESULT/ OBSERVATION |
| 1 | 5.1 | Classification by appearance |
BB | Satisfactory |
| 2 | 5.2 (as per Table 1) | Surface Defects (For Surface Type BB) |
||
| I. Blister | Nil | Nil | ||
| II. Checks | Individual check not more than 100 mm in length and the total length not more 1 000 mm per m2 area | Within Limit | ||
| III. Discoloration | 5 percent | Nil | ||
| IV. Dote | 15 cm per m2 | Nil | ||
| V. Insect Hole | Scattered up to 24 holes per m2 | Nil | ||
| VI. Joints | No restriction | Nil | ||
| VII. Knots (Dead) | 4 up to 20 mm diameter per m2 | Nil | ||
| VIII. Pin Knots (Dead) | 6 per m2 | Nil | ||
| IX. Pin Knots (Live) | No restriction | Nil | ||
| X. Knots (Tight) | No restriction | Nil | ||
| XI. Patches | Any number, provided they are all tight patches and do not mar the appearance | Nil | ||
| XII. Splits | 3 splits, each not more than 4 mm wide and length not more 150 mm, provided they are filled with suitable veneer inserts. Splits up to 25 mm long and 0.8 mm wide may be ignored, provided they are suitably filled with a filler | Nil | ||
| XIII. Swirl | No restriction | Not Observed | ||
| 3 | 5.2 (As per Table 2) |
Permissible Categories of Defects | FOR TYPE B – 5, Maximum number of categories of permissible defects, per m2 | Within Limit |
| 4 | 7.0 | Manufacture | Shall be Satisfactory | Satisfactory |
| 5 | 8 | Dimensions and Tolerance | ||
| 8.1 | Width (mm) | 1220 (+3/-1) | 1220 | |
| Length (mm) | 2440(+6/-3) | 2440 | ||
| 8.2 | Thickness (mm) | 3 mm ( ±5%) | 3.1 (0%) | |
| 8.3 | Squareness (%) | 2 mm per 1000 mm | 0.1 | |
| Edge Straightness (%) | 2 mm per 1000 mm | 0.1 | ||
| 6 | 9.1 | Workmanship and Finish |
The plywood board shall be uniform thickness within the tolerance limit. | Satisfactory |
| 9.2 | The face of plywood board shall be reasonably smooth. | |||
| 7 | 11.3 | Glue Adhesion | ||
| 11.3.1 | a) Water Resistance Test | Pass Standard | ||
| 8 | 11.4 | Moisture Content (%) | (5 – 15) % | 9 % |
| 9 | 11.5 | Static Bending Test | ||
| MOE (In Direction Parallel to The Grain Direction) N/mm2 Min. | ||||
| Average | 1000 N/mm2 | 9516 | ||
| Minimum, Individual | 900 N/mm2 | 9112 | ||
| MOR (In Direction Parallel to The Grain Direction) N/mm2 Min. | ||||
| Average | 10 N/mm2 | 90 | ||
| Minimum, Individual | 9N/mm2 | 87.5 | ||
| Static Bending Test | ||||
| MOE (In Direction Perpendicular to The Grain Direction) N/mm2 Min. | ||||
| Average | 1000 N/mm2 | 6900 | ||
| Minimum, Individual | 900 N/mm2 | 6680 | ||
| MOR (In Direction Perpendicular to The Grain Direction) N/mm2 Min. | ||||
| Average | 10 N/mm2 | 73 | ||
| Minimum, Individual | 9 N/mm2 | 69.8 | ||
3 MM Ply Applications